How to Setup Your Filteroo® Superoo Stainless Steel Gravity Water Filter

Welcome to the Filteroo® Superoo page. Below are links you can click through to know how you can create the best water you can with your Filteroo® Superoo.

Watch our guide videos by clicking on the links below:

How to Assemble your Filteroo® Superoo

How to Install Your British Berkefeld 7” Ultra Fluoride Ceramic Water Filter Candle

How to Assemble Your Filteroo® Superoo

How to Install Your British Berkefeld 7” Ultra Fluoride Ceramic Water Filter Candle

When installing or replacing any water filtration cartridges, ensure you know what you are doing or have a qualified person to help you or contact us for assistance.

Extreme cleanliness is important. Wash hands before handling the product and take care to ensure that no contamination of the components occurs during assembly.

Use a glove or similar so your hands don't touch the cartridge as much as possible.

  1. Place the sealing washer over the threaded mount.
  2. Place the filter candle mount stem through the hole in the upper section of the housing and secure it with a wing nut. Do not over-tighten. Ensure that the outlet tap is in the off position.
  3. Fill the upper container with cold water and allow this to filter through. Our filter is made of a special ceramic and contains carbon granules; this means black particles may be visible when water filters through for the first time.
  4. Discard the first filtered water.
  5. Repeat the process and run at least 0.26 gallons of water to waste per fitted filter, and continue running until the water is clear. Wipe the lower chamber with a clean cloth to remove any dust particles - the filter is now ready for use

If the filter is left to stand for more than 3 days without use, it is recommended that one litre of water be allowed to run to waste before use.

The filter is now ready for use.